8. alarm table
你好。
Hello.
在本教程中，我们将了解 Cam 如何在 HMO 上使用警报，并且警报对于您的客户来说非常重要，因为客户需要知道或需要查看正在发生的情况或策略或机器右侧的错误，您将看到警报显示，我们可以使用一点额外的专家来检查向上和向下或延迟它并说出这样的警报，或者我们可以只使用一个简单的警报。
In this tutorial, we will learn how Cam use alarms on the HMO and alarms are really important for your customers because the customer needs to know or needs to see what's happening or what is an error on the policy or on the machine right side, you will see the alarm display that we can use a little bit extra expert just to check an up and down or delay it and say alarms like that, or we can use just a simple alarm.
显示，这是报警显示区域，好的，这是第一件事，如果我去这里，你需要选择一个设备大厅，首先，我们可以选择一个内部，例如，瞄准零，好的？
Display and this is the alarm display area, OK, this is the first thing, if I go here, you'll need to select a device hall, firstly, an interior we can select, for example, and aim zero like that, OK?
或者我们可以选择零并进入零。
Or we can select the zero and into the zero.
这是数据寄存器，有位 16、位 0、位 1 和位 2。
This is the data register and has a bit 16, then bit zero, bit one with two.
根据这个，我们可以。
According to this one, we can.
我们可以收到警报并且可以监控它们。
We can get alarms and we can monitor them all onto.
好的。
OK.
首先，我将关闭这个，然后我将转到项目区域，在这里您将看到命令下的注释。
Firstly, I will close this one and I will go to the project area and here you will see the comments under the command.
我们把报警报警命令设置的东西并不重要，但是用户报警观察到这里，我们已经完成了系统报警观察。
We have the alarm alarm command set things not important, but user alarm observation into here and we have the system alarm observation done.
你可以设置它系统警报，使用或不使用它，文件说，或者外部输出，我们可以在这里从它们中选择，但并不重要。
You can set it system alarm, use it or not, the files say, or external output we can select from them all here, but not important.
这些都不重要。
These are all not important.
我将转到“新”并听取您可以从此处选择的设备。
Just I will go to new and hear the device you can select from here.
例如，设备之类的。
For example, device like.
零。
Zero.
好的。
OK.
我们可以写评论。
And we can write the comment.
不，我们来编辑它和评论，例如紧急情况。
No, let's edit it and the comment, for example, emergency.
停止。
Stop.
就这样压下去好吗？
Pressed like that, OK?
这是第一个，这里是我们的警报点，我们可以选择十个点，但是从10开始，好的，然后依次是一，二，三，直到九，然后是第二个，例如，我会写。
And this is the first one, and here our alarm point, we can select ten point, but start number 10, OK, then sequentially and one, two, three and until nine, then the second one, I will write, for example.
我们有错误。
We have the error.
好的。
OK.
呃，我会说，好吧，很好。
Uh, I will say, OK, very good.
然后我们在听到的 1 和 0 和 1 下也听到了警报，还有 2、3、4、5、6、7、9、8 和 9 这些都是警报，我会说，好的，在这里我将转到对什么？
Then what we hear here under the one we hear and zero and one has an alarm also and two three four five six seven, nine, eight and nine is these are all alarms and I will say, OK, and here I will just go to right what?
还有阿尔迪和30。
And Aldi and 30.
好的。
OK.
我是零，我将是 31，我想看到关于我的警报，我已经转换重建了我的所有项目。
And out I'm zero, I'll be 31 out, I want to see the alarm on the I I have converted rebuilt all my project.
然后我们可以停止模拟器一次或多或少重新启动。
Then we can stop simulator once more or less restarted.
它写的是我们可以去的。
It is written just we can go to.
HMO 模拟器和是否有紧急停止按钮。
HMO simulator and an emergency stop press or not.
它是否完全运行警报，我们将拭目以待。
That is it running alert completely or not, we will see.
好的，那么我这里看不到警报，但是警报表正常在这里，让我们激活吧。
OK, then I can't see the alarm here, but alarm table is here normally and let's activate.
瞄准零。
Aim zero.
所以我30岁了。
So I'm 30.
我想看《一号窗口》和《31号窗口》。
I will like to watch Window one and 31.
我会等着看窗户。
I will wait to watch windows.
另外，我30了，已激活，然后你会看到M0已激活，这里没有任何改变。
Also, I am 30, is activated, then you will see M0 is active and here nothing is changed.
好的，所以我们需要知道为什么。
OK, so we need to know why.
三十一。
Thirty one.
我们开始做吧。
Let's do it.
这也是事实。
This is true also.
在这里我看不到警报表。
And here I can't see the alarm table.
那么，让我们关闭它，让我们看一次。
So let's close it and let's take a look once.
为什么？
Why?
并听到警报，简单的警报显示，但这没有定义，我会说零。
And hear the alarm, simple alarm display, but the this is not defined and I will say zero.
好的？
OK?
并继续。
And continues.
有多少数据，我只会说我学到了演奏时间，好吧，只是共同的选择必须来自连续的聆听。
How many data and I will just say I learned playing time and OK, just the common selection must come from the hear continuous.
我会这样说。
I will say like that.
好的？
OK?
这是紧急停止按钮，我们有这些，看看我们做了什么。
And this is the emergency stop press and we have these are all look what we did.
简单的报警显示区域。
Simple alarm display area.
我定义了我的.
I defined my.
零和一仅举两个，你就会看到。
Zero and one to name two and you will see.
讨厌评论。
Hate comment.
不，这些都是评论，好吗？
No, these are all the comments, OK?
第一个评论是，如果这是一份礼物，则必须是英国税务海关总署 (HMRC) 上的一个符号，我会说“好吧”。
And the first comment, if this is a gift is must be a symbol on the HMRC, and I will say just OK.
我将再次启动模拟器。
And I will start the simulator again.
好的，正在读取项目数据。
OK, reading the project data.
好的，你会看到外观。
OK, you will see the exterior.
我们可以看到它，并在我的边缘出现一个台阶休息站。
We can see it and emerges a step rest stop placed on the edge of mine.
如果我走到这里，如果我成功了，好吧，那么我们的恐怖就消失了。
And if I go here and if I make this off, OK, then we have terror is gone.
你可以看到。
You can see.
如果我没有激活它们，将其关闭，你就会说这已经消失了。
And if I didn't activate them, turn it off and you will say this is gone.
就这样，M30 就像媒体和 M31 一样出现。
And this is on and M30 is like emerge as the press and M31.
让我们继续吧。
Let's make it on.
那么我们现在就会有恐怖活动。
Then we have terror will be active now.
只要我能渡过难关，你就会说我们有恐怖。
Just I will make it through than you will say we have terror.
所以这是最后一次。
So this is the last.
它正在运行我们能做的事情。
It is running what we can do.
我将结束这个模拟。
I will close this simulation out.
我们能做的就是做一个这样的小应用程序。
Just what we can do, we can do one small application like that.
首先，我们定义命令，根据这些命令，我们可以在HMS上显示我将要使用的警报。
Firstly, we define the command, and according to these commands, we can show the alarms on the HMS just I will I will work with.
我们还可以为用户显示警报。
We can go to also the alarm display for the user.
但并不重要。
But not important.
我将创建自己的警报区域。
I will create my own alarm area.
我说的怎么样，你会说圆形或矩形以及其他任何东西。
How into I said, you will say the circle or rectangle and anything else.
我将把我的矩形放在这里并把它留给它。
And I will put my rectangle to here and left it to it.
线条风格、线条颜色、图案和喜欢的特征没有扩展，没有名称，我会说，好吧，这是第一件事。
And the line style line color and the pattern and love feature no extended, no and the name, I would say, OK, this is the first thing.
还有另一件事我会得到的。
And another thing I will get the.
好的。
OK.
这样，我们可以选择的文本颜色就是黄色，我们可以选择的背景颜色就是灰色。
Like that, and the text color we can select is yellow like that, and the background color we can select is gray like that.
这不可能是绿色的。
This can be no green.
好的。
OK.
而且尺寸也可以。
And the size it can be too.
呃，我会说“好吧”，然后我会像这样放我的手臂。
And uh, I will say OK and here I will put my arms like that.
还。
Also.
现在，好的，这个警报列表，我在这里放两个。
Now, OK, this alarm list, I will put two here.
我们再往下走一点。
Let's go down a little bit more.
好的。
OK.
就这样和。
Like that and.
对了，这个。
Right, this.
以及我们可以为此做些什么。
And what we can do for that.
我会稍微安排一下。
I will arrange a little bit more.
好的，关于英国税务海关总署，这些都是警报，将会发生什么，我会再做一件事，我会说出来。
OK, on to HMRC, these are all alarms and what will happen, I will do one more thing and I will make it said.
并说，如果我们设定这个价格，这将被重置，或者这个，这可以被重置和重置。
And said and one and if we set this price, this is going to be reset it or this, this can be reset and reset.
我是零。
I'm zero.
并且。
And also.
从这里我们就可以下去了。
From here, we can go down like the.
不。
No.
我们也可以在这里插入角色。
And also into here we can insert the role.
现在我可以使用这条垂直线并重置和一，所以这是警报重置，警报被激活并设置了M0，该警报被激活并设置了一个，有人来到机器附近并看到了警报并它会重置它，好吗？
Now I can use this vertical line and reset and one, so this is an alarm reset, the alarm is activated and M0 is set, that alarm is activated and one is set it and somebody came to nearby of the machine and saw the alarm and it's going to reset it, OK?
我将再次转换它，重建所有。
I will convert it again, rebuilt all.
好的。
OK.
让我们停止模拟器。
And let's stop a simulator.
开始重新启动。
Start restarted.
走进这里的是一位衣柜数字设计师。
Into here, a closet digital designer.
嗯，这将重置警报。
Um, this is going to be alarm reset.
好的。
OK.
是文字。
Is text.
阿马里说道。
al-Amari said.
我拉雷塔。
I la receta.
就这样也无所谓了。
Like that doesn't matter.
所以我们可以去模拟器游戏，我们可以测试一次，他们就可以完成本教程。
So we can go to a simulator game and we can test once and they can finish this tutorial.
首先，我们需要做什么，我们需要到这里，你会发现暂时没有计划。
Firstly, what we need to do, we need to go to here and you will see there's no plan for a moment.
和。
And.
您在这里看不到任何警报。
There is no alarm you can see into here.
今天让我们激活它们，首先是出现，赞扬一步停止。
Let's activate them today, firstly and emergence, a step stop is praised.
我们可以看到它。
We can see it.
再说一遍，现在已经是这个时代了。
And again, the it is now in the era.
很高兴听到虚假和真实的信息，而且我们也有 FDA 和其中一些发布了紧急停止，有人被出售了 VA 的问题，但我们仍然看到紧急措施的表达，我们一直感到恐惧，直到有人来了，按下并重置，警报重新启动。
It's good to hear false and true and is true, and we have also the FDA and some of these released emergency stop and somebody is sold the problem of the VA, but we still see emergency step expressed and we have terror on until somebody came and press and reset and the alarm is restarted.
好的？
OK?
这就是如何轻松使用 HMO 上的警报以及我们如何向客户展示本教程的警报，我已经完成了。
This is how come used the alarms on the HMO easily and how can we show the alarm takes to our customers for this tutorial, I'm finished here.
在下一个教程中再见？
See you in the next tutorial?